Forestry Trailer With Hydraulic Grapple
ATV Loader Wooden Tipping Timber Talon Log Grapple Trailer with Folding Arm Log Lifting Crane
The main function of the Log loader crane is to carry out the loading and unloading and handling of wood, timber, reeds, straw and various strip materials: the front end of the wood grabber is the wood grabber, which is mainly used for the loading, unloading and handling of timber, wood and other strip materials
La función principal de la grúa cargadora de troncos es llevar a cabo la carga y descarga y el manejo de madera, madera, cañas, paja y varios materiales de tiras: el extremo delantero de la pinza de madera es la pinza de madera, que se utiliza principalmente para la carga, descarga y manipulación de madera, madera y otros materiales en tiras. Grúa de elevación de pinza de madera de troncos de equipo forestal hidráulico con grúa marina de oscilación de remolque Grúa de madera de troncos
Technical parameters of Hydraulic ATV Farm Log Picker Truck Wood Trailer with Outrigger Lifting Force 2ton Timber Radial Grapple Crane
| Model | TC420 | TC470L | TC550L | TC650L | TC700L | TC780L |
| Arm length (m) | 4.2 | 4.7 | 5.5 | 6.5 | 7 | 7.8 |
| Rotary torque (kn.m) | 11 | 11 | 11 | 18 | 18 | 18 |
| Rotation angle | 380° (left190,right190) | 380° (left190°,right190°) | 380° (left190°,right190°) | 380° (left190°, right190°) | 380° (left190°,right190°) | 380° (left190°,right190°) |
| Number of rotating cylinders(piece) | 4 | 4 | 4 | 4 | 4 | 4 |
| Lifting force at 4 m (kg) | 580 | 580 | 770 | 2000 | 1900 | 1880 |
| Lifting force at full length (kg) | 480 | 510 | 540 | 1100 | 800 | 720 |
| Grab swing brake from side to side | yes | yes | yes | yes | yes | yes |
| Grab swing brake back and forth | yes | yes | yes | yes | yes | yes |
| Telescopic boom structure | no | yes (one section telescopic boom, telescopic stroke about 850mm ) | yes (one section telescopic boom telescopic stroke about 1m) | yes (one section telescopic boom, telescopic stroke 1.3m) | yes (two-section telescopic boom, telescopic stroke 1.6 meters) | yes (two telescopic boom, telescopic stroke 2.5 meters) |
| Boom 360° rotary valve | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs |
| One-way throttle valve for 360° rotation of boom | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs |
| Balance valve | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs | 1pcs |
| Recommended hydraulic oil flow (l/min) | 30-45 | 30-45 | 40-50 | 45-55 | 45-70 | 45-70 |
| Working pressure (mpa) | 20 | 20 | 20 | 20 | 22 | 22 |
| Standard rotary motor | GR-10 (1T Pin shaft) | GR-10 (1t pin shaft) | GR-30F (3t flange type) | GR-30F (3T flange type) | GR-30F (3T flange type) | GR-30F (3T flange type) |
| The standard grab | TG08 (Maximum Opening 800mm） | TG18 (Maximum Opening 1080mm） | TG20 (Maximum Opening 1260mm) | TG20 (Maximum Opening 1260mm) | TG26 (Maximum Opening 1470mm) | TG26 (Maximum Opening1470mm) |
| Total weight (no leg, valve block) | 680kgs | 705 | 770kgs | 1000kgs | 1150kgs | 1210kgs |
| Surface coating | Spray powder-coated (standard color: big and small arms, column base, fixture teeth are red, others are black; OEM accepted) | |||||
| Hydraulic tubing | The oil inlet diameter is 16and the oil return diameter is 19, which is matched with G3 / 4 “quick connector. The forearm of main boom is equipped with external iron tubing | |||||
Hydraulic rotary motor of Forestry Equipment Grapple Log Loader and Trailer ATV Hydraulic Timber crane: drive the boom to rotate through low speed and high torque to ensure the smooth movement of heavy objects;
peculiarity
1. Compact structure and high power density
The hydraulic motor is small in size and light in weight, but can output high torque, which is suitable for the space and power efficiency requirements of the crane.
2. Wide range of speed regulation
The flow rate is regulated by means of a hydraulic valve, which allows for stepless speed regulation from 0 to rated speed, without the need for additional reducers.
3. Strong environmental adaptability
The fully enclosed design can operate stably in dust, humid and even underwater environments, and the safety is higher than that of ordinary motors
4. Low speed and high torque output
Some models (e.g., cycloidal, plunger motors) can directly drive the rotating mechanism, providing low speed and high torque to meet the heavy load needs of the crane67.
5. Overload protection capability
Pressure restriction is achieved through relief valves, allowing for frequent overloads and rapid recovery, protecting the system
GR-30F Hydraulic rotary Motor
More details of Farm Hydraulic grapple Wood Truck Loader ATV tractor Timber Crane Log Grapple with Electronic Joystick Command
Technical parameters of tow behind and trailer, it matches with Hydraulic Forest Equipment Log Timber Grapple Lift Cranes to transport the logs from forest to destination
| Model | TR60 | TR80 | TR100 | TR120 |
| Air brake | no | yes( four wheel with 1061 type brake disc) | yes( four wheel with 1061 type brake disc) | yes ( four wheel with 1061 type) |
| Telescopic girder | no | yes | yes | yes |
| Warning light | no | yes (more safe at environment with poor sight) | yes (more safe at environment with poor sight) | yes (more safe at environment with poor sight) |
| Loading capacity (kgs) | 6,000 | 8,000 | 10,000 | 12,000 |
| Matched power | 40-50hp | 60-80hp | 80-100hp | 80-100p |
| Loading area (m3) | 1.7 | 2.3 | 2.6 | 2.8 |
| Total length (mm) | 5,100 | 5,900 | 6,000 | 6,300 |
| Trailer loading length (mm) | 3,100 | 3,800 | 4,300 | 4,300 |
| Total width (mm) | 1,800 | 2,200 | 2,200 | 2,300 |
| Tyre type | 7.50-16 | 400/60-15.5 | 400/60-15.5 | 500/60-22.5 |
| Quantity of tyre | 4 | 4 | 4 | 4 |
| Sewing angel | 70 | 70 | 70 | 70 |
| Net weight (kgs) | 1,200 | 1,750 | 1,980 | 2,000 |
Telescopic girder/beams advantages for Tractor Wagon Mounted Crane Hydraulic Forestry Crane with Log Grapple Forest Log Trailer with Atv Winch Crane
1. Adapt to a variety of trailer scenarios
Telescopic beams can be flexibly adapted to different sizes of logs by adjusting their length, improving transport compatibility.
2. Enhance structural stability
Extended support range or sinking design (e.g. grooved fixed guide wheels) reduce sloshing during towing and ensure safe transportation.
3. Adapt to dynamic load changes
In heavy loads or complex road conditions, the telescopic beam can disperse the stress between the trailer and the main vehicle, avoiding local overload and structural deformation or damage
2. Functions
1. The length can be adjusted freely
It supports manual or hydraulic drive telescopic to improve loading efficiency.
2. Dynamic load distribution
Combined with high-strength manganese steel, the traction force and bearing pressure are balanced by the telescopic structure, and the chassis and connecting parts are protected.
4. Rapid fixation and release
Through the groove design, the precise positioning and rapid loading and unloading of the towed vehicle are realized, reducing the operation time
The Main function of the trailer tail/t-rear light
Fog Warning: Rear fog lights enhance penetration in rainy and foggy weather, improving the visibility of the trailer in harsh environments
1. Signal Warning
Brake signal: The trailer lights up when the brake light is braking, prompting the vehicle behind to slow down or stop to prevent rear-end collision
Turn Indication: The turn signal flashes to indicate the direction of the trailer to ensure that other traffic participants can avoid it in time when changing lanes or turning
Reversing lighting: Provide rear lighting when reversing, and warn surrounding vehicles and pedestrians to pay attention to the movement of the trailer
2. Improved visibility
Marker positioning: The red marker light shows the trailer silhouette at night or in low-light environments, making it easy for other vehicles to judge its size and position
